| |
|
- Professional chisel cutters designed for fast, smooth cutting at high speeds in clean cutting conditions.
- Manufactured to exacting standards of quality, strength and durability.
- Chromed cutters for longer life and a
sharper edge.
- Engineered for precision, balance and low vibration.
|
|
- Chain is available in 25’ reels, 100’ reels and pre-cut loops.
- When ordering bulk chain in 25’ or 100’sizes, please specify the pitch, gauge and chain type number.
- For loops, please also include the drive link count.
- All reels include presets and tie straps.
|
|
| 1/2" |
12.70mm |
1/4" Pitch |
| 5/8"(approx) |
15.87mm |
.325" Pitch |
| 3/4" |
19.05mm |
3/8" Pitch |
| 13/16" (approx) |
20.62mm |
.404" Pitch |
|
| |
|
A chain’s pitch is determined by measuring the distance between the centers of any 3
consecutive rivets and dividing by two.
 |
|
Gauge of a chain is the thickness of the drive link measured at the fang. It’s essential that the drive link thickness correctly matches the width of the groove in the guide bar. Normal wear makes it difficult to accurately measure drive link thickness on used chain.
 |
|
Kerf is the width of the cut in the wood made
by the saw chain. Optimum kerf for a chain is
. dependent on saw horsepower, chain speed,
guide bar length, and size.
TriLink chain is available
with the ideal kerf for
every combination of
equipment and timber. |
 |
| |
| .325” Pitch - Full Chilsel |
|
 |
|
| GAUGE: .050-1.3mm, .058-1.47mm, .063-1.60mm |
| |
| |
|
|
- Full Chisel style cutters are engineered for fast smooth cutting at high speeds in clean conditions.
- Centri-Lube™ drive links that are engineered to reduce friction and
vibrations thereby increasing the life of the chain.
|
|
- Advanced heat treatment and hard chrome processes allow for improved cutter performance.
- Recommended for experienced or professional users.
- Available as Professional (Non-Safety) or Consumer (Safety) configurations.
|
|
|
| 3/8” Pitch - Full Chilsel |
|
 |
|
| GAUGE: .050-1.3mm, .058-1.47mm, .063-1.60mm |
|
|
|
|
- Full Chisel style cutters are engineered for fast smooth cutting at high speeds in clean conditions.
- Centri-Lube™ drive links that are engineered to reduce friction and
vibrations thereby increasing the life of the chain.
|
|
- Advanced heat treatment and hard chrome processes allow for improved cutter performance.
- Recommended for experienced or professional users.
- Available as Professional (Non-Safety) or Consumer (Safety) configurations.
|
|
|
| .404” Pitch - Full Chilsel |
|
 |
|
| GAUGE: .058-1.47mm, .063-1.60mm |
|
|
|
|
- Full Chisel style cutters are engineered for fast smooth cutting at high speeds in clean conditions.
- Centri-Lube™ drive links that are
engineered to reduce friction and vibrations thereby increasing the life
of the chain.
|
|
- Advanced heat treatment and hard chrome processes allow for improved cutter performance.
- Recommended for experienced or professional users.
- Available as Professional (Non-Safety) configuration only.
|
|
|
| |
|
